About ESSRBOND SRINK FREE CRACK PASTE
ESSRBOND Shrink Free Crack Paste is a water base fiber reinforced acrylic
emulsion polymer paste with special additives which is having good flexibility
to permit thermal and mechanical movement of the services. The product is
single component ready to use for filling cracks in plastered surfaces having
water resistance after drying and with strong bonding on cementitious surface.
It can be used for internal & external surface cracks on plaster up to 10 mm width. No shrinkage even after cured.
Superior Non-Shrink PerformanceESSRBOND SRINK FREE CRACK PASTE ensures no shrinkage after drying, maintaining the integrity and aesthetic of repaired surfaces. Its innovative acrylic polymer blend offers high tensile strength, making it a reliable choice for both interior and exterior wall repairs. The resulting smooth, hard finish is resistant to further cracking, ensuring long-term durability.
Quick and Efficient ApplicationDesigned for convenience, this crack paste is ready to use straight from the container. Touch dry in just 30-45 minutes, it allows for fast progress on projects, with full curing in 6-8 hours. Its smooth consistency guarantees easy spread and filling in cracks ranging from 3 mm x 3 mm, optimizing coverage and minimizing waste.
Eco-Friendly and SafeFormulated with low VOCs and a neutral pH of 7-8, ESSRBOND SRINK FREE CRACK PASTE is non-toxic and environmentally responsible, making it suitable for use in homes, offices, and commercial settings. The water-based acrylic composition allows easy cleanup of tools with water before the product sets, supporting an eco-friendly work process.
FAQ's of ESSRBOND SRINK FREE CRACK PASTE:
Q: How do I apply ESSRBOND SRINK FREE CRACK PASTE for best results?
A: For best results, ensure the surface is clean, dry, and free of loose particles. Use a putty knife or spatula to apply the paste directly into the crack at a recommended thickness of 1-2 mm. Smooth the surface and allow 30-45 minutes for touch drying. Full curing takes 6-8 hours under normal conditions.
Q: What types of surfaces can this crack paste be used on?
A: ESSRBOND SRINK FREE CRACK PASTE is suitable for filling cracks in cement plastered walls, ceilings, and masonry surfaces. It can be used both indoors and outdoors due to its water- and UV-resistant properties.
Q: When can the repaired area be exposed to water or further painting?
A: The repaired area should be left to fully cure for 6-8 hours before being exposed to water or covered with paint or other finishes to ensure maximum adhesion and water resistance.
Q: Where should I store ESSRBOND SRINK FREE CRACK PASTE for optimal shelf life?
A: Store the paste in its original sealed packaging at temperatures between 5C and 35C. When stored properly, it has a shelf life of up to 12 months.
Q: What benefits does this product offer over traditional crack fillers?
A: ESSRBOND SRINK FREE CRACK PASTE provides non-shrink, high tensile strength repairs with a smooth, hard finish. Its water-based, non-toxic and low-VOC formulation makes it eco-friendly and easy to clean up, offering UV and water resistance for long-lasting protection.
Q: How much area does 1 kg of this paste cover?
A: One kilogram of ESSRBOND SRINK FREE CRACK PASTE covers approximately 30-35 Rft for cracks sized at 3 mm x 3 mm.
Q: Is this crack paste safe to use in living spaces and children's rooms?
A: Yes, the product is non-toxic, emits low VOCs and is eco-friendly, making it suitable and safe for all residential spaces including children's rooms.
Send Inquiry
Send Inquiry
