About ESSRBOND BUILDING BOND
ESSRBOND Building bond is a one component, exterior grade,
solvent based, high strength, fast curing construction adhesive.
It uses a high-grade synthetic rubber, to eliminate much of
nailing required for exterior decoration and construction
purpose. It is a versatile general-purpose construction
adhesive suitable for bonding a wide variety of building
materials for internal or external applications like bonding
between Metal, Timber, Polystyrene, Ceramic, Porcelain,
Stone, Gypsum plaster board, MDF board, Galvanized Iron,
Particle board, Aluminium, Steel, Concrete, Cement sheet,
Glass or other rigid surfaces. It is also used for bonding
Edge banding, Trim strip, Trimmings, Rubber & Glass
skirting, Interior & Exterior wooden panels, Polystyrene
foam, Wooden flooring and panelling, Structural Flooring
Panels, Masonry decking application etc.
Strong, Reliable Construction BondESSRBOND BUILDING BOND stands out with its industrial-grade formula, providing a secure hold for a variety of construction materials. Its high tensile strength maintains the integrity of bonded surfaces under stress, while the medium-to-high hardness after curing ensures lasting performance. Its compatibility with materials such as cement, wood, marble, and metals makes it a go-to solution for builders and contractors seeking dependable results.
Easy Application and CleanupThanks to its high viscosity and non-drip nature, ESSRBOND BUILDING BOND allows precise placement and minimal mess. The open time of 10-15 minutes gives users adequate flexibility during assembly. Wet adhesive is easily removed with water, while cured excess can be scraped off. The recommended 1-2mm application thickness ensures optimal coverage and bond strength for most surface types.
FAQ's of ESSRBOND BUILDING BOND:
Q: How should I apply ESSRBOND BUILDING BOND for the best results?
A: For optimal bonding, ensure surfaces are clean and dry. Apply a 1-2mm layer of the adhesive evenly on one surface, press the bonding surfaces together within 10-15 minutes (open time), and allow them to set undisturbed. Initial bond strength is achieved in 6-8 hours, with full strength attained after 24 hours.
Q: What materials is ESSRBOND BUILDING BOND compatible with?
A: ESSRBOND BUILDING BOND is designed for use with a variety of surfaces including concrete, wood, stone, marble, metal, and ceramics, making it suitable for multiple construction and renovation projects.
Q: When can I expect the bond to reach its maximum strength?
A: The adhesive reaches its initial set within 6-8 hours, and full bonding strength is realized after 24 hours of curing.
Q: Where can ESSRBOND BUILDING BOND be stored for maximum shelf life?
A: Store the adhesive at room temperature (10-30C) in a tightly closed container. When stored properly, its shelf life ranges from 12 to 18 months.
Q: What is the recommended process for cleaning up excess adhesive?
A: While the adhesive is still wet, it can be easily cleaned off using water. Once cured, any excess material needs to be removed by scraping.
Q: What benefits does ESSRBOND BUILDING BOND provide for construction projects?
A: It delivers a strong, water-resistant, and weather-resistant bond with excellent holding power. Its non-toxic nature (under recommended use), mild odor, and easy application make it a user-friendly adhesive for professional and DIY projects alike.
Send Inquiry
Send Inquiry
