About EPDM Adhesive
ESSRBOND EPDM Adhesive is a durable and unique
adhesive based on MS Polymer technology cures under
the influence of moisture and leaves a permanent layer
of elastic rubber. It bonds to a variety of EPDM sheet
available in market.
Reliable Bonding for EPDM RubberESSRBOND EPDM ADHESIVE delivers high tensile strength (approx. 350 psi) and strong initial grab, making it ideal for securely bonding EPDM rubber to a wide array of construction materials. Its synthetic rubber composition ensures a flexible, long-lasting bond capable of withstanding harsh weather and water exposure, supporting construction and industrial needs alike.
Effortless Application and EfficiencyDesigned for ease of use, this adhesive features a medium to high viscosity and is applied with a brush or roller. Simply stir, coat both surfaces, allow partial solvent evaporation, and bond with pressure. The fast-drying formula becomes touch-dry in just 10-15 minutes and reaches full strength within 24-48 hours, allowing rapid project progression with dependable results.
Safety and Storage GuidelinesBeing solvent-based and highly flammable (flash point below 25C), ESSRBOND EPDM ADHESIVE requires safe usage. Always apply in well-ventilated spaces, wear protective equipment, and keep away from heat, sparks, and open flames. For optimal longevity, store the adhesive below 30C in a cool, dry place, and use within 12 months from manufacture.
FAQ's of ESSRBOND EPDM ADHESIVE:
Q: How should ESSRBOND EPDM ADHESIVE be applied for best results?
A: Stir the adhesive thoroughly before use. Apply an even coat to both surfaces using a brush or roller, allow the solvent to evaporate until tacky (around 10-15 minutes), then firmly press the surfaces together to ensure a strong bond.
Q: What materials is this adhesive compatible with?
A: ESSRBOND EPDM ADHESIVE is compatible with EPDM rubber, concrete, metal, wood, and masonry. Its formulation supports strong and flexible bonds with most common construction materials.
Q: How long does it take for the adhesive to reach full strength?
A: The adhesive becomes touch-dry in 10-15 minutes. Full bonding strength is achieved within 24-48 hours after application, depending on ambient conditions and substrate type.
Q: What safety precautions should be taken during use?
A: Since the product has a low flash point and emits a characteristic solvent odor, ensure adequate ventilation when using it. Avoid inhalation and direct contact with skin or eyes, wear suitable personal protective equipment, and keep away from open flames or heat sources.
Q: Where should ESSRBOND EPDM ADHESIVE be stored?
A: For optimal shelf life, store the adhesive below 30C in a cool, dry location away from direct sunlight and sources of ignition. Reseal containers tightly after each use.
Q: What is the recommended adhesive thickness for application?
A: For best results, apply the adhesive at a thickness of approximately 0.2 mm to 0.3 mm per surface to ensure effective bonding and coverage.
Q: What are the main benefits of using ESSRBOND EPDM ADHESIVE?
A: The adhesive offers a fast-drying, flexible, water- and weather-resistant bond with excellent coverage. Its strong initial grab and long-term holding power make it suitable for demanding industrial and construction applications.
Send Inquiry
Send Inquiry
